HOLO AIR COOLED CONVEYOR BELT PRESS MACHINE
HOLO PA Air Cooled Press Machine – Air Cooled Press –
HOLO PA Air Cooled Conveyor belt Press Machine
•HOLO PA serious air cooled conveyor belt press is an all-in-one solution for splicing thermoplastic conveyor belts (e.g. PVC PU PVK).
•This splicing press/ vulcanizing machine No external control box, air pump, or water cooling tank are required.
•The HOLO partable presses are provided with electric heating and built in air cooling. The splice process runs fully automated.
HOLO PA Partable Air Cooled Conveyor Press Machine – Air Cooled Press –
Splice pressure is applied by an internal compressor, max. 2 bar
•Heats up to a splice temperature of max. 200°C
•Keeps it at the splice temperature (adjustable dwell time)
•Cools down to the cooling temperature(safe temperature to take the Conveyor belt out)
•For thicker Conveyor belts a preheat temperature and preheat dwell time can be applied
•The bottom heating can be set lower or higher than the top heating
•The splice plate surface is 130 mm wide
•Size PA300 PA600 PA900 PA1200 PA1500 PA1500H PA1800H PA2100H are available for now.
HOLO PA Partable Air Cooled Conveyor belt Press Machine – Air Cooled Press
Features and Benefits:
•Splice times as short as 8-12 minutes.
•All-in-one unit with no external components .
•Two dwell levels of temperature for thick belt .
•Light and easy to handle.
HOLO PA Portable Air Cooled Conveyor belt Press Machine – Air Cooled Press –
•Flight Case included for storage and easy tranport to on-site work.
•Press stand and extension cable is option for efficiency in the fabrication workshop.
Quick Joint All-in-one Machine
The HOLO portable air cooled Conveyor Splice Press machine was designed to splice right on site.It’s an air-cooled design,portable press specifically made for PVC/PU conveyor belts.No extra control box,hoses or cooling tanks are required
The flight case for the machine
HOLO air cooled Presses are supplied with a flight case for both storage purposes and also for easy transport to on-site jobs
Efficient and fast
The machine is very quick. It takes 7-15 minutes to complete one belt joint
|Weight lower part
|Weight upper part
for transport (mm)
|712 x 352 x280
||1012 x 352 x 280
||1312 x 352 x 280
||1612 x 352 x 280
||1912 x 352 x 280
ON 2016 YEAR ,WE DEVELOPED A STRENGTHEN TYPE TO HELPFOR THICKNESS BELT WHICH NEED A HIGHER PRESSURE AND PROVIDE THE WIVE OF HEATING PLATE WHEN TEMPETUARE GOES UP .